Concept
Power Rating
Using the power rating for each of the modules (listed in the following table), accumulate the power consumed by the Smoke Control Server and Central IO modules. The PS-24V can supply up to 30W (~1.25A at 24 VDC). The 24 VDC from the PS-24V is delivered to all modules connecting on the bus on the right side of the PS-24V up to the next power supply module. You must add another PS-24V on the I/O bus to keep the load on the previous power supply at 30W or below.
|
Device |
Power (W) |
|
AS-P or AS-P-NLS |
10.0 |
|
Automation Server |
7.0 |
|
AO-8 |
4.9 |
|
AO-8-H |
4.9 |
|
AO-V-8 |
0.7 |
|
AO-V-8-H |
0.7 |
|
DI-16 |
1.6 |
|
DO-FA-12 |
1.8 |
|
DO-FA-12-H |
1.8 |
|
DO-FC-8 |
2.2 |
|
DO-FC-8-H |
2.2 |
|
RTD-DI-16 |
1.6 |
|
UI-16 |
1.8 |
|
UI-8/DO-FC-4 |
1.9 |
|
UI-8/DO-FC-4-H |
1.9 |
|
UI-8/AO-4 |
3.2 |
|
UI-8/AO-4-H |
3.2 |
|
UI-8/AO-V-4 |
1.0 |
|
UI-8/AO-V-4-H |
1.0 |
Terminal Base Installation
PS-24V Power Supply Module
Automation Server Installation
AS-P and AS-P-NLS Installation
Module and MP Controller Status LEDs
Central IO Module Installation