Connecting an Advanced Display to an AS-P server or AS-B server
You connect an Advanced Display to a AS-P server or AS-B server in order to communicate with EcoStruxure BMS servers over a USB connection, to supply the Advanced Display with power, and to ensure that its battery is charged.
To connect an Advanced Display to an AS-P server or AS-B server
AD v2 Communication and Power
AD v1 Communication and Power
Installing the AD v2 Tablet and Frame
Installing the AD v1 Tablet and Frame
AD v1 or AD v2 Does Not Turn On or Battery Does Not Charge
AD v1 or AD v2 Battery Does Not Fully Charge
USB Data Communication is Lagging or Data is Lost
Insert the USB cable from the Advanced Display into the USB host port on the AS-P server or AS-B server.
Connect only one Advanced Display to an AS-P server or AS-B server. The USB host port can supply only one Advanced Display with power. Connecting several Advanced Displays to an AS-P server or AS-B server can cause the Advanced Displays to lose performance, shut down, or discharge their batteries.
If an Attention message “Unable to find software on your computer that can recognize your device...” appears on the Advanced Display, ignore the message and tap
Ensure that the screen timeout is configured to automatically turn off the screen when you are not using the device, because the sleep mode is used to fully charge the battery.