Concepto
Hardware Overview
The Schneider Electric hardware devices for the EcoStruxure BMS include terminal bases, PS-24V power supplies, I/O modules, SmartX servers such as SmartX AS-P servers and SmartX AS-B servers, SmartX IP Controller devices such as MP-Cs, MP-Vs, IP-IO modules, and RP-Cs, SmartX Sensors, and ADs.
Terminal Bases
The terminal bases are used for SmartX devices that are based on the patented two-piece design. The terminal base provides the I/O bus to the electronics module installed on the terminal base as well as to the SmartX device installed to the right (next terminal base in the chain).
Para obtener más información, consulte Terminal Bases .
PS-24V Power Supplies
PS-24V is the power supply for the SmartX AS-P servers, Automation Server, and I/O modules. The PS-24V power supply requires an input voltage of either 24 VAC +/–20 % or 24–30 VDC.
Para obtener más información, consulte PS-24V Power Supplies .
Automation Servers
An Automation Server is a Schneider Electric manufactured embedded device that generally serves as the lowest tier EcoStruxure BMS server within the EcoStruxure BMS. The Automation Server controls and supervises equipment, typically HVAC equipment. The Automation Server uses I/O modules with connected field devices, such as sensors and actuators, to do that.
Para obtener más información, consulte Automation Servers .
SmartX AS-P Servers
The SmartX AS-P server is the successor to Automation Server, and offers several improvements such as enhanced processor performance, increased memory size, dual Ethernet ports, and high speed USB interfaces. Like the Automation Server, the SmartX AS-P server is a Schneider Electric manufactured embedded device that generally serves as the lowest tier EcoStruxure BMS server within the EcoStruxure BMS. The SmartX server controls and supervises equipment, typically HVAC equipment. SmartX AS-P servers use I/O modules with connected field devices, such as sensors and actuators, to do that.
Para obtener más información, consulte SmartX AS-P Servers .
I/O Modules
By adding a variety of I/O and power supply modules, you can use the SmartX AS-P server or Automation Server to tailor the Intelligent Building Management System to your unique requirements.
Para obtener más información, consulte I/O Modules .
SmartX AS-B Servers
A SmartX AS-B server is a powerful SmartX server that features both onboard I/O and built-in power supply. Like the other SmartX servers, the SmartX AS-B server is a Schneider Electric manufactured embedded device that generally serves as the lowest tier EcoStruxure BMS server within the EcoStruxure BMS. The SmartX server controls and supervises equipment, typically HVAC equipment. The SmartX AS-B server uses its onboard I/O with connected field devices, such as sensors and actuators, to do that.
Para obtener más información, consulte SmartX AS-B Servers .
MP-Cs
SmartX IP Controller – MP-C is a multi-purpose, fully programmable, IP based field controller. The MP-C models offer a flexible mix of I/O point types that suits a wide range of HVAC applications. MP-C is a native SmartX device, which can either be used as a standalone BACnet/IP field controller or as part of an EcoStruxure BMS with a SmartX AS-P or AS-B server, or an Enterprise Server, as the parent server.
Para obtener más información, consulte MP-Cs .
MP-Vs
SmartX IP Controller – MP-V is a multi-purpose, fully programmable, IP based field controller dedicated for VAV applications. MP-V integrates a controller, a damper actuator, and an air flow sensor in a single package for ease of installation. MP-V is a native SmartX device, which can either be used as a standalone BACnet/IP field controller or as part of an EcoStruxure BMS with a SmartX AS-P or AS-B server, or an Enterprise Server, as the parent server.
Para obtener más información, consulte MP-Vs .
IP-IO Modules
The SmartX IP Controller – IP-IO module provides I/O expansion to your HVAC application over BACnet/IP and can share their I/O resources across applications running in SmartX servers, SmartX IP controllers, or third-party systems. The IP-IO module can be installed near facilities in the field, away from the SmartX server or the SmartX IP controller.
Para obtener más información, consulte IP-IO Modules .
RP-Cs
SmartX IP Controller – RP-C is a room-purpose, fully programmable, IP based field controller. The RP-C models offer a flexible mix of I/O point types that suit a wide range of HVAC applications. The controller can either be used as a standalone BACnet/IP field controller or as part of an EcoStruxure BMS with a SmartX AS-P or AS-B server or an Enterprise Server as the parent server. The RP-C features a wireless chip that allows a mobile device running the eCommission SmartX Controllers mobile application to connect directly to the controller.
Para obtener más información, consulte RP-Cs .
SmartX Sensors
SmartX Sensors are a family of living space sensors designed for SmartX IP controllers using the EcoStruxure Building Operation user interface. These sensors use an RJ-45 sensor bus that provides communication and power from the SmartX IP controller.
Para obtener más información, consulte SmartX Sensors .
eCommission Bluetooth Adapter
The eCommission Bluetooth Adapter is plugged into a SmartX Sensor to provide a wireless Bluetooth connection to the SmartX IP controller (Sensor Bus compliant controller) for commissioning, maintenance, and troubleshooting of the controller and the sensor.
Para obtener más información, consulte eCommission Bluetooth Adapter .
AD v1
AD v1 provides a Human Machine Interface (HMI) for local access to the EcoStruxure BMS servers.
Para obtener más información, consulte AD v1 .
AD v2
AD v2 is the successor to AD v1, and offers several improvements such as higher display resolution, enhanced processor performance, and increased memory size. Like AD v1, AD v2 provides a Human Machine Interface (HMI) for local access to the EcoStruxure BMS servers.
Para obtener más información, consulte AD v2 .
AD v3
SmartX Advanced Display v3 (AD v3) is the successor to AD v2. AD v3 provides an industrial grade Human Machine Interface (HMI), with battery-free power supply, for local access to the EcoStruxure BMS servers.
Para obtener más información, consulte AD v3 .
Wiring
The wiring recommendations provide guidance regarding wiring of the I/O modules, SmartX servers, and SmartX IP Controller devices.
Para obtener más información, consulte Wiring .
EcoStruxure Building Management Overview
Terminal Bases
PS-24V Power Supplies
Automation Servers
SmartX AS-P Servers
I/O Modules
SmartX AS-B Servers
MP-Cs
MP-Vs
IP-IO Modules
RP-Cs
SmartX Sensors
eCommission Bluetooth Adapter
AD v1
AD v2
AD v3
Wiring