概念
Electrician Workflow for the eCommission Application
Use this workflow with the eCommission SmartX Controllers mobile application to check out I/O following the installation and wiring of MP Series controllers and other devices. Complete the tasks listed in the following flowchart. Information related to each task can be found in the sections following the flowchart.
Physically wire together the MP Series controllers and other devices that are to be connected.
Connect the eCommission application to the MP Series controllers.
有关更多信息，请参阅 连接和架构选项 .
Start the eCommission application and log in, and then discover MP Series controllers on the network.
有关更多信息，请参阅 Downloading and Starting the eCommission SmartX Controllers Mobile Application .
For each MP Series controller, perform checkout of its inputs and outputs.
有关更多信息，请参阅 执行 I/O 检出 .
After connecting and checking out the MP Series controllers, you can proceed to other tasks as needed:
Capture device information from the controllers
有关更多信息，请参阅 使用控制器列表创建工具捕获设备 .
连接和架构选项
Downloading and Starting the eCommission SmartX Controllers Mobile Application
执行 I/O 检出
使用控制器列表创建工具捕获设备
Commission 移动应用程序的连接工作流程
eCommission 应用程序的技术人员工作流程
风量平衡人员工作流程