概念
RP Series Expansion Module and Multi-sensor Maintenance Modes
The RP Series expansion modules and multi-sensors support different modes that can be used for maintenance purposes.
The following maintenance modes are supported:
Offline maintenance mode
Online maintenance mode
The Status LED on the RP Series expansion modules and multi-sensors indicates when the device is in maintenance mode, provided that the LED is configured in show status mode (default mode). 有关更多信息，请参阅 RP Series Expansion Module LEDs .有关更多信息，请参阅 RP Series Expansion Multi-sensor LED .
The device enters maintenance mode and goes offline when you configure the room bus address 0 for the device using its rotary switch.
In online maintenance mode, the device will be online but without running any software other than what makes it possible to read diagnostics from the device and to upgrade the device.
有关更多信息，请参阅 Configuring an RP Series Expansion Module or Multi-sensor into Online Maintenance Mode .
RP Series Expansion Modules and Multi-sensors
Light Modules
Blind Modules
RP-C-EXT-DALI-M-PD
RP-C-EXT-0-10V-4-PD
RP-C-EXT-BL-4-HV-PD
RP-C-EXT-BL-2-LV-PD
RP-C-EXT-MS-BLE
RP Series Expansion Module LEDs
RP Series Expansion Multi-sensor LED
Configuring an RP Series Expansion Module or Multi-sensor into Online Maintenance Mode
RP-C Room Bus
Connecting RP Series Expansion Modules and Multi-sensors to RP-C
RP Series Expansion Module Room Bus Addressing
Configuring the Room Bus Address for an RP Series Expansion Module
Configuring the Room Bus Address for an RP Series Expansion Multi-sensor
RP Series Expansion Module Diagnostics
Retrieving RP Series Expansion Module Diagnostics