earth_america
user_standard Connexion
action_search_stroke
earth_america
Log on to rate and give feedback 1 2 3 4 5 Log on to rate
0
Comment faire pour

Comment faire pour


Produits : eCommission SmartX Controllers, IP-IO , MP-C, MP-V, RP-C
Fonctionnalités : Ingénierie, Dispositifs SmartX IP Controller
Version produit : 3.3
18/07/2021

Connecting to Network of BACnet/IP Controllers by Wire

Running the eCommission SmartX Controllers mobile application on a Windows laptop computer, you can connect directly to an Ethernet port on a networked BACnet/IP controller, or use an Ethernet switch to connect to a group of controllers.

Afficher plus
action_close

Use this workflow to connect the eCommission SmartX Controllers mobile application to BACnet/IP controllers.

Related information can be found in the sections that follow the flowchart.

 
action_zoom_plus_stroke eCommission Application Connection Workflow
Figure : eCommission Application Connection Workflow
Download, install, and activate the eCommission application

Download, install, and activate the eCommission application, and accept the end user license agreement.

Pour plus d'informations, voir Downloading and Starting the eCommission SmartX Controllers Mobile Application .

Pour plus d'informations, voir Lancement et activation de l'application mobile eCommission SmartX Controllers .

Power up the controllers

Power up the BACnet/IP controllers.

Pour plus d'informations, voir Powering Up MP-C .

Pour plus d'informations, voir Powering Up MP-V .

Prepare a wired or wireless connection for eCommission application

Prepare a wired or wireless connection for use with the eCommission application mobile device.

Connection Type

More Information

Wired connection to a single controller

Pour plus d'informations, voir Connecting to Single BACnet/IP Controller by Wire .

Wired connection to a network of controllers

Pour plus d'informations, voir Connecting to Network of BACnet/IP Controllers by Wire .

Wireless connection to a network of controllers via a WiFi router

Pour plus d'informations, voir Connecting to Network of BACnet/IP Controllers through WiFi Router .

Wireless connection to a network of controllers via a wireless access point

Pour plus d'informations, voir Connecting to Network of BACnet/IP Controllers through a Wireless Access Point .

Start the eCommission application and discover controllers

Start the eCommission application and then discover the BACnet/IP controllers on the network.

Pour plus d'informations, voir Downloading and Starting the eCommission SmartX Controllers Mobile Application .

To connect to a network of BACnet/IP controllers by wire

  1. Configure the network connections on the eCommission application computer and the BACnet/IP controllers:

    Pour plus d'informations, voir Configuring BACnet/IP Device Settings .

    • If the network contains a DHCP server, configure these network connections for DHCP addressing.

    • If the network does not contain a DHCP server, configure these network connections for static IP addressing.

  2. Connect an Ethernet cable between the eCommission application computer and Port 1 of an BACnet/IP controller on the network. If you are using an Ethernet switch, connect the computer and the controllers to the switch, using Ethernet cables.

  3. In the eCommission application, on the Select Connection view, select the WiFi icon

     
    action_zoom_plus_stroke
    to start Ethernet networking.

  4. In the Device List view, select the BACnet/IP controllers to make the connections.

Using the eCommission application, you can now perform tasks on the connected BACnet/IP controllers as needed.

Voir aussi

  • Connection Workflow for the eCommission Application
  • Configuring BACnet/IP Device Settings