earth_america
user_standard Anmelden
action_search_stroke
earth_america
Log on to rate and give feedback 1 2 3 4 5 Log on to rate
0
Ratgeber

Ratgeber


Produkte: eCommission SmartX Controller, IP-IO , MP-C, MP-V, RP-C
Funktionen: Technik, SmartX IP Controller-Geräte
Produktversion: 3.3
18.07.2021

Connecting to Single BACnet/IP Controller by Wire

Running the eCommission SmartX Controllers mobile application on a Windows laptop computer, you can connect directly to a BACnet/IP controller by Ethernet wire. Optionally, you can use an Ethernet switch to connect the computer and the BACnet/IP controller.

Mehr zeigen
action_close

Use this workflow to connect the eCommission SmartX Controllers mobile application to BACnet/IP controllers.

Related information can be found in the sections that follow the flowchart.

 
action_zoom_plus_stroke eCommission Application Connection Workflow
Abbildung: eCommission Application Connection Workflow
Download, install, and activate the eCommission application

Download, install, and activate the eCommission application, and accept the end user license agreement.

Für weitere Informationen siehe Downloading and Starting the eCommission SmartX Controllers Mobile Application .

Für weitere Informationen siehe Starten und aktivieren Sie die mobile App eCommission SmartX Controllers .

Power up the controllers

Power up the BACnet/IP controllers.

Für weitere Informationen siehe Powering Up MP-C .

Für weitere Informationen siehe Powering Up MP-V .

Prepare a wired or wireless connection for eCommission application

Prepare a wired or wireless connection for use with the eCommission application mobile device.

Connection Type

More Information

Wired connection to a single controller

Für weitere Informationen siehe Connecting to Single BACnet/IP Controller by Wire .

Wired connection to a network of controllers

Für weitere Informationen siehe Connecting to Network of BACnet/IP Controllers by Wire .

Wireless connection to a network of controllers via a WiFi router

Für weitere Informationen siehe Connecting to Network of BACnet/IP Controllers through WiFi Router .

Wireless connection to a network of controllers via a wireless access point

Für weitere Informationen siehe Connecting to Network of BACnet/IP Controllers through a Wireless Access Point .

Start the eCommission application and discover controllers

Start the eCommission application and then discover the BACnet/IP controllers on the network.

Für weitere Informationen siehe Downloading and Starting the eCommission SmartX Controllers Mobile Application .

To connect to a single BACnet/IP controller by wire

  1. Configure the network connections on the eCommission application computer and the BACnet/IP controller for DHCP addressing.

    Für weitere Informationen siehe Configuring BACnet/IP Device Settings .

  2. Connect an Ethernet cable between the eCommission application computer and Port 1 of the BACnet/IP controller. If you are using an Ethernet switch, connect the computer and the controller to the switch, using Ethernet cables.

    Hinweis

    Because an actual DHCP server is not used, both the eCommission application computer and the BACnet/IP controller will self-assign link-local IP addresses.

  3. In the eCommission application, on the Select Connection view, select the WiFi icon

     
    action_zoom_plus_stroke
    to start Ethernet networking.

  4. In the Device List view, select the BACnet/IP controller to make the connection.

Using the eCommission application, you can now perform tasks on the connected BACnet/IP controller as needed.

Siehe auch

  • Connection Workflow for the eCommission Application
  • Configuring BACnet/IP Device Settings