You install SpaceLogic Bluetooth Adapter on a SpaceLogic Sensor to provide a wireless Bluetooth connection to a BACnet/IP controller for commissioning, maintenance, and troubleshooting of the controller and the sensor.
Remove the protective cap from the adapter's male connector, rotate the cap with its hinge mechanism to the back end of the adapter, and snap the cap on to the back end.
You can attach a lanyard to the adapter to help preventing loss and dropping. For more information, see Attaching a Lanyard to SpaceLogic Bluetooth Adapter .
With the adapter's button to the front, plug the adapter into the female connector on the upper-right side of the SpaceLogic Sensor.
The physical connector is a USB style connector, but the electrical interface and communication protocol are not USB.
You can now pair the Bluetooth adapter with your mobile device running the Commission mobile application.