RP-C-EXT-DALI

Introduction

SpaceLogic* RP-C-EXT-DALI light module connects to the SpaceLogic RP room controllers and provides I/O expansion for lighting control with DALI (Digital Addressable Lighting Interface).

The DALI light module enables control of lights equipped with DALI ballasts (DALI control gear).

The DALI light module is a DALI-2 certified control device (application controller). DALI-2 compliance means benefits such as improved interoperability and easier installation and maintenance. The DALI light module can be used with DALI version-1 products because DALI-2 is designed to be backward compatible with DALI version-1.

Lighting can be controlled by the RP-C through motion detection and light intensity measurement provided by the Multi-sensor or by SpaceLogic Sensors connected to the RP-C.

The DALI light module is part of the RP controller expansion modules for connected room solution and can be combined with other modules from this product range.

^{* Formerly known as SmartX.}

Features

The DALI light module has the following features:

Power and communications through the room bus
DALI-2 certified control device (application controller)
Group and individual addressing of DALI devices
One DALI channel, which is split into four outputs, for DALI bus power supply and control of up to 32 lights
Up to 16 DALI groups for common control of lights
Four digital inputs for connection of light switches and window contacts. The digital inputs are SELV (Safety Extra-Low Voltage).
Suitable for mounting in ceilings
Wieland connectors for quick and easy installation
Engage mobile application for room comfort settings
Status LED for the device
Rotary switch for address configuration

DALI lighting control

The DALI-2 interface has the following features:

DALI groups can combine lights regardless of which outputs the lights belong to.
Lights that belong to the same DALI group are controlled simultaneously for switching on/off, dimming, and color temperature (tunable white) adjustment
Management of ballast and lamp alarms
Automatic addressing of lights

Room bus

The RP-C room bus allows RP controller expansion modules and multi-sensors to be connected to the controller for motion detection, luminosity measurements, communication with remote control (RP-C-RC-BLE), and control of electric lights and window blinds.

The RP-C room bus supports up to six connected RP controller expansion modules with the following restrictions:

Maximum of two DALI light modules
Maximum of two SMI blind modules
Maximum of four multi-sensors

Maximum total length of the room bus is 72 m (236 ft).

Engage mobile application

The Engage mobile application enables control of room temperature, fan speed, lights, and blinds/shades directly from a smartphone. A user can manage these settings when the application is connected to the RP-C controller.

The Engage mobile application is free and available for download from Google Play and Apple App Store.

For more information, see the Engage Specification Sheet.

Product	Part number
RP-C-EXT-DALI	SXWREDALI110001
DIN-RAIL-CLIP, DIN-rail end clip package of 25 pieces	SXWDINEND10001

Especificações

Electrical

Nominal voltage

100 to 277 VAC

Operating voltage range

+/-10 %

Frequency

50/60 Hz

Power consumption

10 VA

Room bus power consumption

0.3 W (24 VDC)

Overvoltage category

III

Environment

Ambient temperature, operating

0 to 50 °C (32 to 122 °F)

Ambient temperature, storage

-20 to +70 °C (-4 to +158 °F)

Humidity

20 to 90 % RH non-condensing

Pollution degree

Material

Plastic flame rating

UL94 V-0

Ingress protection rating

IP 20

Mechanical

Dimensions

198 W x 110 H x 64 D mm (7.8 W x 4.3 H x 2.5 D in.)

action_zoom_plus_stroke

Weight

0.352 kg (0.776 lb)

Installation

DIN rail or flat surface

Connectors

Power input: 1 x 3-pin Wieland GST15i3 connector

Light outputs: 4 x 2-pin Wieland GST15i2 connector

Digital inputs: 4 x 2-pin Wieland GST15i2 connector

Software compatibility

EcoStruxure Building Operation software

version 3.2 and later

Agency compliances

Emission

RCM; BS/EN 61000-6-3; BS/EN 50491-5-2; FCC Part 15, Sub-part B, Class B

Immunity

BS/EN 61000-6-2; BS/EN 50491-5-3

Safety standards

BS/EN 60730-1; BS/EN 60730-2-11; BS/EN 50491-3; UL 916 C-UL US Listed

Fire performance in air-handling spaces ^a

UL 2043

a) The RP-C-EXT-DALI light module is approved for plenum applications.

Digital addressable lighting interface

IEC 62386-101; IEC 62386-103

Communication ports

Room bus

RS-485

Dual RJ45 ports for daisy-chain configurations

Use a Cat 5 (or higher) cable

Maximum total length of the room bus: 72 m (236 ft)

Room bus protection

Transient voltage suppressors on communication and power signals

Hardware

Main microcontroller

CPU type

ARM Cortex-M4 single-core

Frequency

80 MHz

SRAM (embedded)

320 KB

Flash memory (embedded)

1024 KB

Memory

NOR flash memory

16 MB

DALI microcontroller

CPU type

ARM Cortex-M0 single-core

Frequency

32 MHz

SRAM (embedded)

8 KB

Flash memory (embedded)

64 KB

Additional hardware

Status indicator

LED (green and red) that shows the status of the device

Address switch

Rotary switch 0 to 9

Set button

Push-button switch

DALI light outputs

Outputs

4, Light 1 to Light 4

The four outputs share one DALI channel.

Output terminals

DA+ and DA-

DALI bus voltage

18 VDC

Maximum supply current

250 mA

Guaranteed supply current

64 mA

Maximum cable length

See the SpaceLogic Hardware Reference Guide

DALI devices

Supported control gear

See table below.

Device type number	Type of control gear	Supported
Device Type 0 (DT0)	Fluorescent lamp control gear	Yes
Device Type 6 (DT6)	LED lamp control gear (LED modules)	Yes
Device Type 8 (DT8)	Color control gear	Yes ^a

a) Color type Tc (Color temperature) of Part 209 of the IEC 62386 standard is supported.

Digital inputs

Inputs

4, DI1 to DI4

Range

Dry contact, 0 to 5.0 VDC, 2.2 mA, SELV (Safety Extra-Low Voltage)

Tabela: Required External Connectors

Use	Part number	Reference	Connector type	Suitable for cable diameters mm (inches)	Marking	Color of coding / housing	Minimum order quantity
Power supply input	SXWRPCCONWWPOW	91.931.4053.1	Female	5.6–11 (0.22–0.43)	L, PE, N	Black /Black	100
DALI outputs	SXWRPCCONWWLIGHT	91.922.3453.0	Male	6–7.7 (0.24–0.30)	D2, D1 D2: DA+ D1: DA-	Pastel blue /White	100
Digital inputs	SXWRPCCONWDI	91.921.2353.0	Female	3.4–5.5 (0.14–0.21)	1, 2 1: DI1..4 2: RET	Light blue /White	100

The external connectors need to be ordered separately. The connectors can be ordered in quantities of 50 or 100 from Schneider Electric using the above part numbers. The connectors can also be ordered directly from Wieland using the above reference numbers. For more information, see the Wieland Electric web site.

Funcionalidade

Produtos

Como

Especificações

Resolução de problemas

Referência de programadores

Especificações

RP-C-EXT-DALI

Introduction

Features

Especificações

Connections

Funcionalidade

Produtos

Como

Especificações

Resolução de problemas

Referência de programadores

Especificações

RP-C-EXT-DALI

Introduction

Features

Especificações

Connections

Ver também